Featured Products

PST-P8511 Single channel thermometer for one DSTGL40/C probe.

319.94 AUD

Overnight Post Services

PST Warranty



      Please note that all prices on this website exclude G.S.T

Capacitance
Part No: PROCAP I & II

BinMaster’s capacitance sensors are used for high and low level detection in bins, silos, tanks, hoppers, chutes and other vessels used for material storage or process manufacturing. They operate by detecting the presence or absence of material in contact with the probe by sensing minute changes (as low as 0.5 pF) in capacitance caused by the difference in the dielectric constant of the material versus the air. Class II hazardous location ratings and a wide assortment of probes and extensions make these capacitance probes appropriate for a variety of solid, liquid and slurry materials.
details Contact sales
Part No: PROCAP IX & IIX

BinMaster PROCAP IX and IIX capacitance sensors are designed for use in hazardous locations, featuring CSA Class I, Groups C & D and Class II, Groups E,F & G ratings. They are suitable for challenging environments where there is a risk of explosion, detecting high and low levels in bins, silos, tanks, hoppers, chutes and other vessels used for volatile material storage or process manufacturing. BinMaster capacitance sensors operate by detecting the presence or absence of material in contact with the probe by sensing minute changes (as low as 0.5 pF) in capacitance caused by the difference in the dielectric constant of the material versus the air. A wide assortment of probes and extensions make BinMaster capacitance probes appropriate for a variety of solid, liquid and slurry materials.
details Contact sales
Part No: PROCAP I 3-A & II 3-A

The PROCAP I 3-A and II 3-A meet rigorous USDA, FDA and 3-A material and design standards for sanitary food and dairy processing. They can be used for high and low level detection in bins, silos, tanks, hoppers, chutes and other vessels used for the storage or manufacture of food or dairy products. They operate by detecting the presence or absence of material in contact with the probe by sensing minute changes (as low as 0.5 pF) in capacitance caused by the difference in the dielectric constant of the material versus the air. They feature a Class II hazardous location rating and are available with a wide assortment of probes and extensions to meet a variety of processing needs.
details Contact sales
Part No: PROCAP I-FL & II-FL

The PROCAP I-FL and II-FL offer “no probe intrusion” and are designed for space constrained areas or applications where material flow or bridging may damage a standard probe. It can be mounted on a bin wall, conveyor housing or a chute. The face of the bottom of the FL serves as the capacitance sensor which features Pro-Shield compensation for material build up and an adjustable time delay of up to 30 seconds to ensure accurate readings. Plus, it offers unsurpassed sensitivity of 0.5 pF, to make it appropriate for use with a wide variety of powders, solids, liquids and slurries.
details Contact sales
Part No: Pro Auto-Cal

Pro Auto-Cal offers simple and automatic calibration and external testing without having to remove the cover of the unit. Calibration takes just seconds and is performed with the use of a special magnet. This unit also allows for the simulation of either a covered or uncovered condition without accessing the probe assembly or the electronics and unsurpassed sensitivity of 0.5 pF for enhanced accuracy. A visual LED on the top of the housing indicates sensor status such as uncovered, covered or power failure.
details Contact sales
Part No: Pro Remote

The Pro Remote capacitance sensor features remote electronics located in a housing that is separated from the probe making it suitable for high temperature, high vibration, or hazardous environments. It is CSA Class II listed and allows for the electronics to be installed up to 75 feet from the sensing probe and the hostile conditions, depending on the required sensitivity. It offers simple, "Quick-Set" calibration and adjustable sensitivity to less than one picofarad, making it highly reliable in a variety of powders, solids, liquids and slurries.
details Contact sales
Part No: Compact Pro

The Compact Pro is a compact capacitance probe for reliable level measurement and plugged chute detection for liquid, powder, granular, and pelleted materials. This probe is designed for tight spaces where proximity switches will not work and is appropriate for use in tanks, bins, silos, chutes, conveyors, pipes and load out hoppers. Operation is independent of bin wall and it can be used with either metal or non-metallic vessels. It features four levels of static discharge protection, which is important for pneumatically conveyed materials.
details Contact sales
Part No: Annunciator

The BinMaster Point Level Alarm Panel is designed to alert the user to vessel level conditions via a blinking LED light and an audible alarm, saving time and eliminating the need to manually inspect vessel levels. Level indicators – such as a diaphragm switch, rotary paddle, tilt switch, capacitance probe or vibrating rod – are placed strategically at desired points in each vessel, enabling the user to be automatically notified when a bin reaches a full, partially full, or empty level. The alarm panel can also be connected to an external horn or common alarm to provide alert status from a variety of locations throughout a facility.


details Contact sales
Part No: Bendable Capacitance Probe

The bendable capacitance probe is designed to fit in tight spaces or in vessels where obstructions prevent the installation of a straight probe. This probe can be bent to avoid obstructions in a vessel while still allowing adequate probe surface area to confirm the presence or absence of material. Mounted on the side of the bin, the bendable probe can be used in a wide range of solid materials or slurries. One common application for the bendable probe is for high and low level detection in smaller mixers or containers used in food processing plants.
details Contact sales
Forthcoming Events




News & Events 

PST implements a Quality System, certified by QAS according to Standard QAS ISO 9001:2008


MadgeTech Product Updates

- Madgetech New Data Logger Design for the RHTemp1000 Series - click for more details - MadgeTecg HiTemp140X2 Dual Probe Data Logger Series is now available! - click for more details