Shopping Cart
Shopping cart0 item(s) - AUD0.00
Your shopping cart is empty!
Categories
Bestsellers
Latest
Product Code : PRTC210..
AUD1,248.00
Based on 0 reviews.

Standard Rotary Level Indicator

Brand: BinMaster
Product Code: BMRX
Availability: In Stock
Price: AUD655.38

Available Options


* BMRX Voltage Options:

Qty:
+ ــ
Add to Wish List Add to Compare

The BRMX rotary paddle bin level indicator provides reliable point level detection and measurement of dry bulk solids in bins, tanks, silos, hoppers and conveyors for materials including grain, feed, plastic pellets, cement and aggregates. Mounted on the top or side of a bin, the BinMaster BMRX alerts operators when bins are full without the rigors and risks associated with climbing and continuously checking bins levels. When material is not in contact with the paddle, the paddle rotates freely. When the paddle comes into contact with dry bulk material, the paddle stops rotating and sends a signal – normally through the use of a horn or light – to alert that the bin is full.

The BinMaster BMRX features “de-energized” operation of the motor which shuts the motor down when materials is present, versus competitive rotaries which put the motor in a "stalled" condition. Power is not consumed until the bin is emptied and the drive shaft again begins to rotate – which saves on energy costs and prolongs motor life. It offers a fail-safe alert providing notification when power to the unit is lost. The BMRX rotary design includes a screw-top enclosure for easy access to motorized parts. It is CE approved and is appropriate for use in hazardous conditions when explosion proof protection is needed – featuring Class I, Groups C and D, Class II E, F, and G listings.

PADDLES SOLD SEPERATELY.

Refer the rotary paddle selection guide under 'Literature' for paddle details.

Write a review

Your Name:


Your Review: Note: HTML is not translated!


Rating:
Bad           Good

Enter the code in the box below:
  

Continue
  • Reliable point level detection for bulk solids including powders, pellets and granular materials
  • Used in bins, silos, chutes and conveyors
  • Material density from 2 lb./cu. ft. to over 100 lb./cu. ft.
  • Feed, seed, grain, food, sand, gravel, concrete, aggregates, plastics, chemicals, coal and many other materials
  • Rugged construction and simple, dependable design
  • Triple thread screw-off cover
  • Switch selectable high/low fail-safe
  • De-energizing motor for extended operational life
  • Four-bearing shaft assembly reduces wear and increases reliability
  • Internal, bi-directional clutch
  • Various voltages available
  • DPDT relay output, 250 VAC, 10 Amp
  • Dual conduit entrance
  • Removable wiring terminals
  • Interchangeable with other rotaries
  • Powder-coated finish
  • Adjustable sensitivity

Power Requirements: 24/115/230 VAC, 50/60 Hz; 24/ 12 VDC, 60/35 mA

Output Contacts: DPDT 10 Amp, 250 VAC

Ambient Operating Temp: -40°F to +185°F (-40°C to +85°C)

Process Temp: Up to +400°F (204°C)

Pressure: 1/2 micron, 30 PSI

Approvals & Certifications: CSA/US Class I, Groups C & D and Class II, Groups E, F & G
Ex II 2G 1D Ex d IIB T5 Ex tD A20 IP66 T93C (Ta = -20C to +85C)

Enclosure Type: NEMA 4X, 5, 7, 9 & 12

Enclosure: Die cast aluminum, USDA approved powder coat finish

Mounting: 1-1/4” NPT

Conduit Connections: 3/4” NPT

Shaft and components: Stainless steel

Rotary - BMRX & MAXIMA+ Brochure   PDF Download
Rotary Paddle Selection Guide   PDF Download
BMRX Manual   PDF Download
Rotary Application Worksheet   PDF Download
Flexible Extended Rotary Brochure   PDF Download
BMRX DC Manual   PDF Download
Adjustable Rotary Brochure   PDF Download
Rotary Product Listing   PDF Download
Bulk Density Chart   PDF Download
BMRX Manual ATEX   PDF Download