Description
The MC Monitors are designed to continuously monitor pH, EC or TDS values directly in your reservoir. Each unit features a user selectable set-point. An LED visual alarm is activated and flashes when the pH, EC or TDS level rises either Above or Below (user selected) that set-point.
All these instruments run on a 12V adapter so there's no need to worry about failed batteries and each unit comes with mounting kit, probe, probe holder and starter calibration solution.
TDS - PPM Monitor
- User selectable Hi/Low Set Point
- Manual 1 point calibration
- Visual LED alarm
- Supplied with 12 VDC adapter, mounting kit, and 20ml 1382ppm calibration solution
- MA812/2 PPM Probe with 2m cable
| ORDERING INFORMATION |
MC410 is supplied with 12 VDC adapter, mounting kit and 1 x 20ml sachet of 1382ppm calibration solution. |
Specifications
- Range: 0 – 1990 (ppm) mg/L
- Resolution: 10 (ppm)
- Accuracy: ±2% F.S.
- Conversion factor: 0.7
- Calibration: Manual, 1-point
- Set point: 100 to 1900 (ppm)
- Alarm: Active when reading is higher or lower than set point
- Temperature Compensation: Automatic, from 0 to 50°C | 32 to 122°F
- EC electrode: MA812/2 (included)
- Environment: 0 to 50°C / 32 to 122°F; max RH 95%
- Power Supply: 12 VDC adapter (included)
- Mounting kit (Included)
- Dimensions: 5.9 x 3.2 x 1.35 inches (148.5 x 82.5 x 32 mm)
Weight: 6.3 ounces (180 g) (meter only)
Accessories
Reviews
Leave your review
