BinMaster FCP | Flexible Capacitance Probe

This flexible cable extension probe is designed for high, mid, or low-level detection when it is necessary to top mount the sensor. It is also very effective in aggregates, coal, or other lump materials that might damage a rigid probe. The extension is available in shielded bare (maximum length 35 feet) and shielded Teflon-coated (maximum length 25 feet) cable. The cable can be cut to the desired length in the field. Both feature PRO-Shield protection against false readings caused by coating or buildup. The shielded bare cable extension probe allows for mounting in a standoff pipe or nozzle. The shielded Teflon-sleeved cable extension should be used in applications where conductive material--like most liquids--may leave a residue on the probe.

Call Us on 1300 662 720 for a Quote.

Shielded Bare 316 SS Hanging Flexible Extension

Maximum Temp: 250ºF (121ºC) for Standard probe

Maximum Pressure: 50 psi (3.5 kg/cm2) for 1-1/4” NPT, 500 psi (35 kg/cm2) for 3/4” NPT

Probe Material: 316 stainless steel, 1/4” diameter cable with Delrin insulator

Lengths Available: 16 inches to 35 feet

Fitting Options: 3/4” NPT, 1-1/4” NPT, 1” food grade, 1”/2”/3”/4” 150# Raised face flanges

Power Pac Options: PROCAP I & II, PRO Remote, PRO Auto-Cal

Shielded Teflon Sleeved 316 SS Hanging Flexible Cable Extension

Maximum Temp: 500ºF (260ºC)

Maximum Pressure: 50 psi (3.5 kg/cm2) for 1-1/4” NPT, 500 psi (35 kg/cm2) for 3/4” NPT

Probe Material: 316 stainless steel, 1/4” diameter cable with Teflon sleeve and insulator

Lengths Available: 16 inches to 25 feet

Fitting Options: 3/4” NPT, 1-1/4” NPT, 1” food grade, 1”/2”/3”/4” 150# Raised face flanges

Power Pac Options: PROCAP I & II, PROCAP IX & IIX, PRO Remote, PRO Auto-Cal

Shielded Bare 316 SS Hanging Flexible Extension in lengths up to 35 feet

Shielded Teflon-Sleeved 316 SS Hanging Flexible Cable Extension in lengths up to 25 feet

Cables can be cut to length in the field

• High, mid or low level detection when it is necessary to top mount the sensor
• Point level detection and process control for various solid, liquid and slurry applications when top mounting
• For aggregates, coal, or other lump materials that might damage a rigid probe
• Teflon-sleeved can be used for point level detection and process control for various solid, liquid and slurry applications when top-mounting
• Teflon sleeved probe should be used in applications where conductive material may leave residue on the probe, including most liquids