- sales@pacificsensortech.com.au
- Mon - Fri: 9:00 - 17:00
Menu
- info@pacificsensortech.com.au
Menu
Single-Piece Flow Detector
The single-piece Flow Detect 2000 flow detector is a flow/no flow detector that, unlike the two-piece flow detector, houses both the remote sensor and control console in a single NEMA 4X enclosure. The Flow Detect 2000 helps prevent cross contamination by ensuring flow has stopped before a new material is introduced into the flow stream. It can help prevent potentially dangerous and expensive FSMA, USDA, or FDA compliance issues at facilities producing food for human or animal consumption. It is ideal for detecting flow conditions of solids and powders in gravity chutes, feeders, pipelines, conveyor belts, or bucket elevators. Optional North American Class II, Division 1 Groups E, F, & G and ATEX Zone 21 hazardous location approvals are available.
Product Code: BC-730-0668
Power Requirements: 1 Watt at 24 VDC +/-10%
Detection Range: 1.5 m (4.9 ft.)
Sensitivity Adjustment: High / low selection switch with potentiometer
Relay Outputs: 250 VAC / 220 VDC / 2A (N.C. or N.O.)
Output Delay Range: Switchable from 0.1 to 3.1 seconds / 2.3 to 15.1 seconds
Fault Conditions: Doppler sensor failure and excessive temperature
4-20mA Output
No Flow: 4mA +/-4%
Flow: 20mA +/-4%
Fault: 22mA +/-4%
4-20mA Load: 650 Ohms Maximum
Operating Temperature: -22°F to 140°F (-30°C to 60°C)
Storage Temperature: -40°F to 176°F (-40°C to 80°C)
Emissions: 24.11 GHz, 6.6 mW typical / 9.9 mW maximum
Enclosure: White Powder Coated Aluminum, NEMA 4X
Mounting: 1-1/4” NPS
Conduit Entry: 3/4” NPT
Process Pressure: 80 PSI
Hazardous Location Approvals (optional): North American Class II, Division 1 Groups E, F, & G and ATEX Zone 21
