- sales@pacificsensortech.com.au
- Mon - Fri: 9:00 - 17:00
Menu
- info@pacificsensortech.com.au
Menu
3D Multiple-Scanner System, integrates multiple-point measurement data from two or more 3DLevelScanners.
In very large bins, tanks or silos, the BinMaster MVL 3D multiple-scanner system is the answer for precise inventory management. The MVL system integrates multiple-point measurement data from two or more 3DLevelScanners (aka 3D Solids Scanners) to cover a very wide surface area which makes it able to estimate inventory volume with greater accuracy than previously available from any level measurement device. Using advanced processing and software, the MVL displays a visual representation of the material surface showing high and low points in the bin such as cone up, cone down, sidewall buildup or bridging.
| Item Code | Description |
| BC-730-0626 | 3DLS-MVL : 3DLevelScanner-MVL is for use in multiple scanner systems that include the 3D visualization feature. It features a 7.67” diameter horn, 20-36 VDC, 4-20 mA output / Hart protocol, and RS-485 communications. When used in a multi-scanner system, it provides accurate readings of level and volume for stored materials based on two or more synchronized MVL units. The multiscanner system provides an analog output which represents (as a default value) the overall volume of the contents of the entire silo. Unit comes with internal LCD display and 3DVision software. A controller (purchased separately) calculates volume and unifies the visualization by integrating data from multiple scanners. Appropriate for silos up to 200’ tall. Hazardous location approved, FM listed for Class I, II, Division 1, Groups C, D, E, F & G. One year warranty. |
| BC-730-0644 | 3DLS-MVL-HT : 3DLevelScanner-MVL with extended temperature up to 365°F is for use in multiple scanner systems that include the 3D visualization feature. It features a 7.67” diameter horn, 20-36 VDC, 4-20 mA output / Hart protocol, and RS-485 communications. When used in a multi-scanner system, it provides accurate readings of level and volume for stored materials based on two or more synchronized MVL units. The multiscanner system provides an analog output which represents (as a default value) the overall volume of the contents of the entire silo. Unit comes with internal LCD display and 3DVision software. A controller (purchased separately) calculates volume and unifies the visualization by integrating data from multiple scanners. Appropriate for silos up to 200’ tall. No hazardous location approvals. One year warranty. |
Preferred Applications: Powders and solids
Measuring Range: 200 feet (61 meters)
Process Temperatures: -40°to +185°F (-40°to +85°C) Standard, -40°to +356°F (-40°to +180°C)
High Temp Process Pressure: -0.2 – 3 bar (-2.9 to 14.5 psi)
Signal Output: 4-wire 4 – 20 mA/HART/RS-485/Modbus
Emitting Frequency: 3 KHz to 10 KHz
Supply Voltage: 20 to 32 VDC
Power Consumption: Max 1.5 W @ 24 VDC
Hazardous Locations: CFM Intrinsically Safe Class I, II, Division I, Groups C, D, E, F, G (US & Canada)
