BinMaster SBR II AO | Smart Bob

The SmartBob AO with built-in 4-20 mA output and integrated keypad can easily replace any 4-20 device by simply installing the SmartBob on the top of the bin and wiring the sensor to the existing 4-20 input. When the SmartBob AO takes a measurement, it automatically transmits an updated analog signal containing the measurement data to a PLC. The SmartBob AO can be programmed to initiate a measurement utilizing an internal timer to take readings at a predetermined time interval or an external start input can be used to take a measurement immediately, should one be needed. Two configurable relay outputs can be used to alert to measurement status or high, low, or error alarms.

Power Requirements: 115/230 VAC 50/60 Hz

Ambient Temp: -40°F to +185°F (-40°C to +85°C)

Process Temp: Up to 500°F (260°C)

Measurement Range: Up to 180’

Measurement Rate: 2 feet per second

Accuracy: ± 0.25% distance measurement accuracy

Mounting: 3” NPT

Enclosure: Molded polycarbonate

Approvals & Certifications: Listed for Class II, Groups E, F, & G Hazardous Locations

Enclosure Type: NEMA 4X, 5 & 12

• Direct 4-20 mA analog output
• Alternative to using consoles or software
• Simple user interface to configure the sensor
• Measures bins automatically in timed intervals
• Two relays configurable with four different options
• Initiate measurements via interval timer or external start input
• Two current source options for supplying power to 4-20 current loop

• Operations that prefer direct 4-20 mA analog output versus using the C-100 console or Binventory software
• Rugged, simple, and dependable inventory measurement system for solid, liquid and slurry materials in vessels up to 180 feet
• Works in dusty and very demanding applications
• Vendor-managed inventory
• Plastics, chemicals, coal, concrete, food ingredients, pharmaceuticals, feed/grain, aggregates, and many other materials