- sales@pacificsensortech.com.au
- Mon - Fri: 9:00 - 17:00
Menu
- info@pacificsensortech.com.au
Menu
Display for any Modbus-enabled level sensor
The DPM-100 digital panel meter is a versatile, easy-to-use display for any Modbus-enabled level sensor. Useful for indoor or outdoor applications, it features a large, bright LED display that is easily visible regardless of bright sunlight, smoke, fog, dust, or distance. The DPM-100 can be programmed as a Modbus RTU master, slave, or snooper. Each device is capable of scanning up to 16 process variables, making it ideal for multiple tank level monitoring and control. A convenient keypad allows users to set and acknowledge alarms and manage output relays.
Input/Output: Modbus RTU over RS-485
Display: Upper display: 0.60″ (15 mm) high. Lower display: 0.46″ (12 mm) high. Both are 6 digits, red LEDs
Display Scan Rate: Master/Snooper: 1/second to once every 99.9 seconds. Slave: Dependent on master device (e.g. PLC)
Front Panel: NEMA 4X, IP65
Non-Volatile Memory: All programmed settings are stored in nonvolatile memory for a minimum of ten years if power is lost.
Power Options: 85-265 VAC 50/60 Hz, 90-265 VDC, 20 W max, or optional model with 12-24 VDC ±10%, 15 W max.
Fuse: Required external fuse: UL Recognized, 5 A max, slow blow; up to 6 meters may share one 5 A fuse.
Environmental: Operating temperature range: -40 to 65°C; Storage temperature range: -40 to 85°C
Relative Humidity: 0 to 90% non-condensing
Power: USB Port
