1300 662 720

Customer Support

1300 662 720

Customer Support

1300 662 720

Customer Support

HiTemp140 | High temperature data logger

The HiTemp140 is a submersible, high temperature data logger built for use in harsh environments.

Select your Rigid Probe Length:

Refer to Dimensional Drawing in “Literature” tab in the description below

 

Other Probe Styles Available:

Refer to the “Probe Styles” tab in the description below

Available on back-order

  • *IFC400 Interface is required to operate this device:

    • 0 $
    • 325 $
    • 0 $
    • 199.5 $
    • 0 $

$ 1,499.00 Ex. GST

Share

Share on facebook
Share on twitter
Share on whatsapp
Share on email

The HiTemp140 is a submersible, high temperature data logger built for use in harsh environments. This device is extremely versatile and can be tailored to the application with various probe lengths and styles available.

The HiTemp140 can withstand temperatures ranging from -40 °C to +140 °C (-40 °F to +284 °F), but is capable of measuring extended temperatures up to 260 °C (500 °F) (probe dependent). With a storage capacity of up to 32,256 time and date stamped readings, the HiTemp140 can be programmed for immediate start or delayed start up to 18 months in advance.

The HiTemp140 is compatible with the latest MadgeTech 4 Software making starting, stopping, and downloading simple and easy. Graphical, tabular, and summary data is provided for analysis and can be viewed as customizable engineering units.

Body of data logger cannot exceed 140 °C (284 °F), but can extend to higher temperatures when used with MadgeTech’s thermal barrier options.

HiTemp140-FR fast response probe is very thin to increase the response time, hence fragile, should be used carefully to avoid physical damages, which is not covered under manufacturer warranty.

HiTemp140-PT bendable metal probe can be bent to a 0.25 inch bend radius. The probe should not be bent within 1 inch of either weld joint, which will cause physical damages to the weld joints, which is not covered under manufacturer warranty. Where possible, the HiTemp140-FP flexible probe will be a better alternative.

Learn More about the HiTemp140 Series Here!

See the full range for Autoclave and Sterilizer Validation.

General

Memory 32,256 readings
Reading Rate 1 reading every second up to 1 reading every 24 hours
Baud Rate 125,000
Battery Life 2 years typical (1 minute reading rate)
User Replaceable Battery
Material 316 Stainless Steel, Radel
HiTemp 140 Rigid and Rigid Transitional Diameter Dimensions HiTemp140-1 Body: 1.55 in x 0.97 in dia. (40 mm x 25 mm dia.)
Probe: 1 in x 0.125 in dia. (0.188 in transitional dia.)
25 mm x 3.2 mm dia. (4.8 mm transitional dia.)
Body (for 2 in, 5.25 in, 7 in;): 1.75 in x 0.97 in dia. (45 mm x 25 mm dia.)HiTemp140-2 : 2.0 in x 0.188 in dia. (51 mm x 4.8 mm)HiTemp140-2-TD: 2.0 in x 0.125 in dia. (0.188 in transitional dia.)
(51 mm x 3.2 mm dia. (4.8 mm transitional dia.)HiTemp140-5.25: 5.25 in x 0.188 in dia. (134 mm x 4.8 mm)HiTemp140-5.25-TD: 5.25 in x 0.125 in dia. (0.188 in transitional dia.)
(134 mm x 3.2 mm dia. (4.8 mm transitional dia.)HiTemp140-7: 7.0 in x 0.188 in dia. (178 mm x 4.8 mm dia.)
HiTemp140 Fast Response Probe Dimensions Body: 1.89 in x 0.97 in x 0.97 in (48.1 mm x 24.6 mm x 24.6 mm)
Probe: 1.75 in x 0.0625 in dia. (0.188 in transitional dia.) (44.5 mm x 1.59 mm (4.78 mm Transitional dia.))
Key Ring End Cap Key ring replaces standard bottom
Thru-hole: 0.150″
IP Rating IP68
Submersible Yes
Operating Environment -40 °C to +140 °C (-40 °F to +284 °F); 0 %RH to 100 %RH; 0.002 PSIA to 100 PSIA (Body of Logger Cannot Exceed 140 °C)
Required Interface Package IFC400
Approvals CE

 

Temperature

Temperature Sensor 100 Ω Platinum RTD
Temperature Resolution 0.01 °C (0.018 °F)
Temperature Calibrated Accuracy ±0.1 °C/±0.18 °F (20 °C to +140 °C/68 °F to +284 °F)
±0.3 °C/±0.54 °F (-20 °C to +19.99 °C/-4 °F to +67.98 °F)
±0.4 °C/±0.72 ºF (-40 °C to -20.01 °C/-40 °F to +-4.02 °F)
Probe Temperature Range -200 °C to +260 °C (-328 °F to +500 °F) (Body of Logger Cannot Exceed 140 °C)
Image Probe Type Material Operating Environment Probe Measurement Range
Rigid Metal Temperature: -40 °C to +140 °C (-40 °F to +284 °F)
Humidity: 0 %RH to 100 %RH
Pressure: 0.002 PSIA to 100 PSIA
Temperature: -200 °C to +260 °C (-328 °F to +500 °F)
Probe only. Body must not exceed Operating Environment
Rigid Transitional Diameter (TD) Metal Temperature: -40 °C to +140 °C (-40 °F to +284 °F)
Humidity: 0 %RH to 100 %RH
Pressure: 0.002 PSIA to 100 PSIA
Temperature: -200 °C to +260 °C (-328 °F to +500 °F)
Probe only. Body must not exceed Operating Environment
Flexible (FP) Bendable PTFE Temperature: -40 °C to +140 °C (-40 °F to +284 °F)
Humidity: 0 %RH to 100 %RH
Pressure: 0.002 PSIA to 60 PSIA
Temperature: -60 °C to +260 °C (-76 °F to 500 °F)
Probe only. Body must not exceed Operating Environment
PT Bendable Metal Temperature: -40 °C to +140 °C (-40 °F to +284 °F)
Humidity: 0 %RH to 100 %RH
Pressure: 0.002 PSIA to 100 PSIA
Temperature: -200 °C to +350 °C (-328 °F to +662 °F)
Probe only. Body must not exceed Operating Environment
Fast Response (FR) Metal Temperature: -40 °C to +140 °C (-40 °F to +284 °F)
Humidity: 0 %RH to 100 %RH
Pressure: 0.002 PSIA to 100 PSIA
Temperature: -200 °C to +260 °C (-328 °F to +500 °F)
Probe only. Body must not exceed Operating Environment

HiTemp140 Rigid and Rigid Transitional Diameter Probes Specification Sheet

HiTemp140 Rigid and Rigid Transitional Diameter Probes Product User Guide

HiTemp140 Rigid and Rigid Transitional Diameter Probes Dimensional Drawing

 

HiTemp140 Response Time Chart


Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.