Customer Support

1300 662 720

PR140 | Pressure Data Logger

IFC400 Interface is required to operate this device:
Calibration:

2 standard points [1-week]

Call us on 1300 662 720 for a quote

Order total:

$2,676.00 Ex. GST

The PR140 is a pressure data logger designed for use in autoclave validation and mapping. This rugged data logger can withstand temperatures up to +140 °C (+284 °F) and is completely submersible (IP68). The PR140 is built with a precision stainless steel pressure gauge. The data logger has an accuracy of ±0.03 Bar (±0.435 PSI), which can be achieved over a wide temperature range, from +20 °C to +140 °C (+68 °F to +284 °F). The PR140 can be programmed to take readings as often as once per second (1 Hz), and has non-volatile memory that can store up to 32,700 measurements.

The PR140 data logger is easy to use. Simply place it in the IFC400 docking station, connect to a computer, and the device can be started, stopped or downloaded using the MadgeTech software. Graphical, tabular and summary data is provided for analysis and can be viewed in PSIA, mmHg, bar, Torr and kPa. The data can also be automatically exported to Excel® for further calculations.

See the full range for Autoclave and Sterilizer Validation >>

General

Memory 32,256 readings
Reading Rate 1 second to once every 24 hours, selectable in software
Baud Rate 125,000
Battery Life 2 years typical (1 minute reading rate at 25 °C / 77 °F)

Fast reading intervals and extreme temperatures will shorten the battery life substantially

Material 316 Stainless Steel, Radel
Dimensions 2.29 in x 1.0 in dia. (58.2 mm x 25.4 mm dia.)
IP Rating IP68
Submersible Yes
Operating Environment -20 °C to +140 °C (-4 °F to +284 °F), 0 %RH to 100 %RH
Note: The PR140 may be used above +60 °C for up to 8 hours, per 24 hour period.
Approvals CE

 

Pressure

Pressure Sensor Semiconductor Strain Gauge
Pressure Range 0 to 5 Bar (0 to 72.5 PSIA)
Pressure Resolution 0.0001 bar (0.00145 PSIA)
Pressure Calibrated Accuracy ±0.03 bar from +20 °C to +140 °C (+68 °F to +284 °F)
±0.1 bar from -20 °C to +19.99 °C (-4 °F to +68 °F)

Reviews

There are no reviews yet.

Be the first to review “PR140 | Pressure Data Logger”

Your email address will not be published. Required fields are marked *

Register Your Interest