MAXIMA+

Fail-Safe Rotary Level Indicator, features a complete fail-safe system that alerts to the loss of power, failure of the motor, or failure of the electronics.

Select your Model:

Currently Out of Stock, Backorder only! This item may take 3-4 weeks to deliver. Call us on 1300 662 720

$ 1,328.00 Ex. GST

Share

Share on facebook
Share on twitter
Share on whatsapp
Share on email

BinMaster’s most advanced rotary level indicator features a complete fail-safe system that alerts to the loss of power, failure of the motor, or failure of the electronics – allowing it to be used for process control. Appropriate for a wide variety of bulk solids including powders, pellets, or granular materials, the MAXIMA+ alerts the user to bin status via an audible horn or light wired to the unit. Notification occurs when the paddle stops rotating and is in a covered condition; it alerts again when the paddle begins to rotate as the bin is emptied and the paddle is uncovered. The MAXIMA+ can be mounted on either the side of the bin or at the top of a bin using a shaft extension. To prolong motor life and to optimize energy costs, the motor of the MAXIMA+ will “de-energize” once the shaft stops turning when material comes into contact with the paddle. BinMaster offers a variety of stainless steel and polyethylene paddles in single and three-vane designs to accommodate a wide range of industries and applications.

Item Code Description
BC- 730-0528 MAXIMA+ 24/115/230 VAC – Fail-safe rotary level indicator power pac with hazardous location approval, C/US listed for Class II, Groups E, F, & G and a visual LED status light monitoring paddle rotation, paddle covered, and fault conditions. Features a triple-thread, screw-off cover, dual conduit entries, DPDT relay contacts, fail-safe protection, SPDT normal and fault relay contact and FDA recognized powder coat finish
BC- 730-0662 MAXIMA+ 12-24VDC – Fail-safe rotary level indicator power pac with hazardous location approval, C/US listed for Class II, Groups E, F, & G and a visual LED status light monitoring paddle rotation, paddle covered, and fault conditions. Features a triple-thread, screw-off cover, dual conduit entries, DPDT relay contacts, fail-safe protection, SPDT normal and fault relay contact and FDA recognized powder coat finish.
  • Reliable point level detection for bulk solids including powders, pellets and granular materials
  • Used in bins, silos, chutes and conveyors
  • Material density from 2 lb./cu. ft. to over 100 lb./cu. ft.
  • Feed, seed, grain, food, sand, gravel, concrete, aggregates, plastics, chemicals, coal and many other materials
  • Microprocessor-based fail-safe indicator eliminates spills and process shortages from power failures, motor or gear failures
  • Visual LED indicates sensor status:n uncovered, covered and fault conditions
  • Supervise normal and fault conditions
  • De-energizing motor for extended operational life
  • Four-bearing drive shaft assembly reduces wear and increases reliability
  • Triple thread screw-off cover
  • Internal, bi-directional clutch
  • Multiple voltages
  • Interchangeable with other rotaries
  • Powder-coated finish
  • Adjustable sensitivity

Power Requirements: 24/115/230 VAC, 50/60 Hz; 12/24 VDC, 60/35 mA

Output Relay: DPDT 10 Amp, 250 VAC

Status Indicator Relay: SPDT 10 Amp, 250 VAC (solid state relays optional)

Ambient Operating Temp: -40°F to +185°F (-40°C to +85°C)

Process Temp: Up to +400°F (204°C)

Pressure: 1/2 micron, 30 PSI

Approvals & Certifications: CSA/US Class II, Groups E, F, & G
Ex II 1/2D c Ex tb IIIC T138C Db (Ta = -20C to +85C)

Enclosure Type: NEMA 4X, 5, 9 &12

Enclosure: Die cast aluminum, USDA approved powder coat finish

Mounting: 1-1/4” NPT

Conduit Connection: 3/4” NPT

Shaft and components: Stainless steel

Rotary Product Line Brochure

Rotary Product Listing

Rotary Paddle Selection Guide

Flexible Extended Rotary Brochure

Adjustable Rotary Brochure

Bulk Density Chart

MAXIMA+ Manual2

Rotary Application Worksheet