1300 662 720

Customer Support

1300 662 720

Customer Support

1300 662 720

Customer Support

MS6-Rack | 16 Channels

Sixteen Channel Data Logger for 19″ Rack with Alarms

Share

Share on facebook
Share on twitter
Share on whatsapp
Share on email

The complete solution for monitoring of temperature, humidity, pressure, CO2, voltage, current, pulses, events and other signals. Universal configurable inputs and outputs. For mounting to 19″ rack – one rack unit 1U. Enables to build in the optional MP050 output relays module with 16 relays – see Optional accessories.

Data loggers are designed for measuring, recording, evaluation and subsequent processing of input electrical signalswhich are subject to relatively slow changes (> 1s). In conjunction with the appropriate sensors and transducers are suitable for monitoring physical quantities.

The device includes traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO / IEC 17025. The calibration sheet is always loaded as modules.
If the defined required configuration of inputs by, calibration certificate proves calibration inputs according to the required configuration – more than one range for each of the 16 inputs.

INCLUDED IN DELIVERY:

  • MS6-Rack
  • Instruction Manual
  • Traceable Calibration Certificate
Warranty: 3 years

MEASURED VALUE

Temperature
Relative humidity
Counted values (dew point…)
Current
Voltage
Two-state signal
Frequency
Resistance
Event logging

GENERAL TECHNICAL DATA

Operating temperature 0 to +50 °C
Channels 1 to 16 inputs – software configurable
Memory 2MB (up to 480 000 values)
Memory type internal SRAM, backed-up by Lithium battery
Recording interval adjustable individually for all input channels from 1 second to 24 hours
Recording interval noncyclic – data logging stops after filling the memory
cyclic – after filling memory oldest data is overwritten by new
Real time clock year, leap year, month, day, hour, minute, second, backed-up by Lithium battery
Resolution of the AD converter (analog channels) 16 bits, conversion duration approximately 60ms/channel
Communication speed 9600, 19200, 57600, 115200 Bd, 230400* Bd (* pro USB, Ethernet)
Power 24 Vdc
Protection class IP20
Rozměry 483 x 190 x 44 mm – one rack unit 1U
Weight approx. 800 g
Warranty 3 years

FEATURES

Device enables:

  • to measure and process 1 to 16 input signals
  • to acquire autonomous time record of measured values
  • create alarm states
  • to perform other actions based on created alarms (audible, visual indication, controlling of relay outputs, sending SMS message, controlling of telephone dialer, sending of messages via several protocols of the Ethernet interface etc.)
  • to monitor on-line measured values and states
  • independent hysteresis setting, delay (for each channel separately)
  • setting up to four alarm conditions (for each channel separately)

Common connectivity options:

Monitoring system MS may be configured for almost any desired measurement application. Sensors can be wired to datalogger in star-like connection as well as in serial. Combination of both is also possible. The monitoring system MS is characterized by a wide range of communication interfaces such as the RS232, RS485, USB, Ethernet and GSM or GPRS modem. Thanks to Wi-Fi routers several measuring systems MS can be wirelessly connected to a network.

Parameters and measuring ranges of configurable inputs MS6D

The monitoring systems MS6xx is equipped with 16 freely programmable universal inputs. Each of them can be set to the input signal according to the table below. The monitoring system is thus very flexible and offers ease of use. The RS485 input must be ordered separately if you want to use the Modbus or Advantech communication interface.

Main features:

  • software configurable inputs for temperature sensors Pt and Ni, thermocouples and thermistors, voltage and current, two-state events, resistance, sensors with RS485 output
  • memory for 500 000 records with automatic downloading to PC
  • alarm indication via integrated siren, e-mail, SMS and two-state output to control other devices
  • software for data analysis on PC
  • communication interface USB, RS232, relays, RS485 (Modbus RTU), ETHERNET (Modbus TCP, SOAP, etc.)

Instruction Manual

Declaration of Conformity

Monitoring System setup wizard step by step

 

COMET-Catalog_monitoring_systems

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.