Shopping Cart
Shopping cart0 item(s) - AUD0.00
Your shopping cart is empty!
Categories

Latest Products
AUD 3,113.00
 
AUD 138.50
Best Sellers

S0111 - Thermometer for external probe with display

Brand: Comet
Product Code: PST-S0111​
Availability: In Stock
Price: AUD324.00 AUD243.00
Save: 25%

* Prices in this web site are excluding GST


Qty:
+ ــ
Add to Wish List Add to Compare

S0111 - Thermometer for external probe with display

 Thermometer is designed for record of temperature. Values are stored to a non-volatile electronic memory. Data transfer to the personal computer for further analysis is performed via USB, RS232, GSM or Ethernet interface by means of a proper adapter.

The device includes Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard.

For communication with the PC must be from Optional accessories ordered USB adapter, LAN adapter or COM adapter or start/stop magnet if is needed to control logging the other way than directly from computer.

Write a review

Your Name:


Your Review: Note: HTML is not translated!


Rating:
Bad           Good

Enter the code in the box below:
  

Continue

Main thermometer applications:

  • Transport of food or pharmaceuticals
  • Food and beverage industry (HACCP)
  • Pharmaceutical industry
  • Blood stations, pharmacies
  • Horticulture and cultivation of plants
  • HVAC (heating, ventilation, air conditioning, cooling)
  • Building and energy management
  • Research and development
  • Laboratories (GLP)
  • Warehouses
  • Technological processes
  • Museums, archives, galleries
  • TÜV SÜD certified to conform to EN 12830, Class 1 and EN 13486, Class 1 for the transport of food

 

 Thermometer advantages:

  • included traceable calibration certificate from the manufacturer - Comet
  • fast data transfer to the PC (full memory for approximately 30s)
  • variability of connection to the computer - USB, RS232, Ethernet, GSM modem
  • permanent connection to the PC enabled, data is possible to download even during logging
  • large data memory 32000 values
  • optional display of minimum and maximum measured values (reset of min/max memory from PC or by magnet)
  • dual level alarm is enabled for each channel; alarm is indicated by blinking of the LED diode
  • two alarm modes are enabled: instant or with memory (detected alarm is indicated permanently till alarm memory is cleared from the PC)
  • robust watertight case
  • easy installation, locking enabled
  • low power consumption from battery, battery life up to 7 years
  • indication of remaining battery life, easy replacement of the battery
  • standard temperature sensor is Pt1000/3850ppm, switchable to Ni1000/6180ppm external probes at range -50 to +150°C
  • it is possible to combine temperature measurement with logging of contact state (e.g. door contact)
  • logging start/stop is enabled in several ways: at certain time and date programmed from computer, by delivered magnet
  • also special logging mode is enabled, when logging runs only, if some of measured values are out of adjusted alarm limits
  • each logger is possible to describe with text of maximum 32 characters
  • each channel is possible to describe with text of maximum 16 characters
  • password protection is enabled to prevent unauthorized manipulation with logger

 

Included in delivery:

  • Data logger including the battery
  • Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard.
  • Quick start manual
  • Free basic Windows software is ready to download at folder Download

Technical parameters

Value

Measured Value

Temperature

Construction Type

For External Temperature Probes Pt1000

Temperature Measuring Range

-90 to 260 °C

Two-State Input

No

LCD Display

Yes

Built-In Printer

No

Operating temperature range

-30 to +70°C

Accuracy of temperature input without probe

±0.2°C from -50 do +100°C
±0.2% from reading from +100 to +260°C
±0.4% from reading from –90 to –50°C

Resolution of the reading

0.1°C

Real time clock

year, leap year, month, day, hour, minute, second

Data logging interval

adjustable from 10s to 24h

Display and alarm refresh

each 10 s

Total memory capacity

32000 temperature values in noncyclic logging mode

Data logging mode

noncyclic - data logging stops after filling the memory
cyclic - after filling memory oldest data is overwritten by new

Dimensions

93x64x29mm

Power

Lithium battery 3,6V, size AA

Typical battery life

6 years

Battery life in continuous on-line mode with interval 1 minute

reduced to 70% of the above life

Battery life in continuous on-line mode with interval 10 second

1 year

IP protection

IP67 - protected against influence of temporary immersion into water

Weight including battery

115g

Warranty

3 years