1300 662 720

Customer Support

1300 662 720

Customer Support

1300 662 720

Customer Support

NCR-80 | Non-Contact Radar

80 GHZ Non-contact radar designed for superior performance in extremely dusty powders and bulk solids.


Share on facebook
Share on twitter
Share on whatsapp
Share on email

The BinMaster NCR-80 is a non-contact radar level sensor designed for superior performance in extremely dusty powders and bulk solids. Its powerful 80 GHz frequency focused in a narrow 4° beam angle with a measuring range up to 393 feet and accuracy within 0.2 inches means it excels in tall and narrow vessels. The NCR-80 is offered with a 10°swiveling, stainless steel flange for precise targeting; a lightweight plastic antenna with an 8° swiveling flange or a mounting strap for adjustable targeting; or a 1-1/2″ NPT mounting option for use in an existing process connection. The NCR-80 is resistant to interference, while its advanced filters ensure rapid signal processing and an update rate of less than one second.

  • Cement, grain, power, wood chips, pellets, sand, aggregates, or plastics
  • Very tall, narrow silos for single point level measurement
  • Vessels with excessive noise, dust, or high temperatures
  • Vessels where precise aiming is needed to avoid flow stream, internal structure, or sidewall buildup
  • Low dielectric materials or materials with limited reflectivity
  • Mounted over piled material in flat storage warehouses
  • Over conveyors belts to prevent overloading or detect when belts are running empty
  • Measure levels within equipment, such as crushers or ESP hoppers
  • Level measurement of piles or pits
  • Powerful 80 GHZ non-contact radar
  • Measuring distance up to 393 feet
  • 4° beam angle for precise targeting
  • Reliable accuracy within 0.2 inches
  • High temperatures up to 392°F
  • Hazardous location approvals
  • FDA approval for food or pharmaceutical use
  • Chemical-resistant for long-lasting performance
  • BinDisc option simplifies setup and configuration


Frequency: 79 GHz
Measuring Range: 394 feet (120 m)
Accuracy: ± .2” (5mm)
Power Requirements: 

  • Low Voltage Version: 9.6 to 48 V DC, 20 to 42 V AC, 50/60 Hz
  • Regular Voltage Version: 90 to 253 V AC, 50/60 Hz

Enclosure Rating: IP66/IP68 (0.2 bar), IP66/IP67, IP66/IP68 (1 bar)
Output: Profibus PA, Foundation Fieldbus, Two-wire 4 – 20 mA/HART®, Modbus, Four-wire 4 – 20 mA/HART®


  • Stainless Steel (Metal) Flange
  • Plastic Antenna
  • 1-1/2″ NPT

NCR-80 Brochure

Non-Contact Radar Product Listing

NCR-80 Accessories Brochure

NCR-80 Operating Instructions – Four-Wire

NCR-80 Operating Instructions – Two-Wire

NCR-80 Quick Setup Manual

NCR-80 Radar 0 Degree Adapter Flange Spec Drawing