Customer Support

1300 662 720

BMRX | Rotary Paddle Level Sensor

$1,113.89 Ex. GST

NOTE: Power Pack only. Paddles and Accessories (Extensions, Shaft guards, etc.) sold Separately.
Call us on 1300 662 720 to get a quote on complete assembly.

The BRMX rotary paddle level sensor provides reliable point level detection and measurement of dry bulk solids in bins, tanks, silos, hoppers, and material conveyors. Mounted on the top or side of a bin, the BinMaster BMRX alerts operators when bins are full—normally through the use of a horn or light. The BMRX features “de-energized” operation of the motor which shuts the motor down when material is present, saving energy costs and prolonging the motor life. It is CE approved and is appropriate for use in hazardous conditions when explosion proof protection is needed–featuring Class I, Groups C and D, Class II E, F, and G listings.

Item Code Description
BC-730-0504 BMRX – 115 VAC – Rotary level indicator power pac featuring a triple-thread, screw-off cover, dual conduit entries, DPDT relay contacts, selectable fail-safe protection, FDA recognized powder coat finish, hazardous location approval, and C/US listed for Class I, Groups C & D and Class II, Groups E, F & G.
BC-730-0503 BMRX – 230 VAC – Rotary level indicator power pac featuring a triple-thread, screw-off cover, dual conduit entries, DPDT relay contacts, selectable fail-safe protection, FDA recognized powder coat finish, hazardous location approval, and C/US listed for Class I, Groups C & D and Class II, Groups E, F & G.
BC-730-0505 BMRX – 24 VAC – Rotary level indicator 24 VAC with dual conduit entries, DPDT relay contacts, selectable fail-safe protection, and FDA recognized powder coat finish, hazardous location approval, and C/US listed for Class I, Groups C & D and Clas II, Groups E, F & G.
BC-730-0661 BMRX – 24 VDC – Rotary level indicator 12 to 24 VDC with dual conduit entries, DPDT relay contacts, selectable fail-safe protection, and FDA recognized powder coat finish, hazardous location approval, and C/US listed for Class I, Groups C & D and Class II, Groups E, F & G.

Power Requirements: 24/115/230 VAC, 50/60 Hz; 24/ 12 VDC, 60/35 mA

Output Contacts: DPDT 10 Amp, 250 VAC

Ambient Operating Temp: -40°F to +185°F (-40°C to +85°C)

Process Temp: Up to +400°F (204°C)

Pressure: 1/2 micron, 30 PSI

Approvals & Certifications: CSA/US Class I, Groups C & D and Class II, Groups E, F & G
Ex II 2G c 1/2D c Ex d IIB T4 Gb Ex tb IIIC T130C Db (Ta = -20C to +85C)

Enclosure Type: NEMA 4X, 5, 7, 9 & 12

Enclosure: Die cast aluminum, USDA approved powder coat finish

Mounting: 1-1/4” NPT

Conduit Connections: 3/4” NPT

Shaft and components: Stainless steel

  • Reliable point level detection for bulk solids including powders, pellets and granular materials
  • Used in bins, silos, chutes and conveyors
  • Material density from 2 lb./cu. ft. to over 100 lb./cu. ft.
  • Feed, seed, grain, food, sand, gravel, concrete, aggregates, plastics, chemicals, coal and many other materials
  • Rugged construction and simple, dependable design
  • Triple thread screw-off cover
  • Switch selectable high/low fail-safe
  • De-energizing motor for extended operational life
  • Four-bearing shaft assembly reduces wear and increases reliability
  • Internal, bi-directional clutch
  • Various voltages available
  • DPDT relay output, 250 VAC, 10 Amp
  • Dual conduit entrance
  • Removable wiring terminals
  • Interchangeable with other rotaries
  • Powder-coated finish
  • Adjustable sensitivity

Reviews

There are no reviews yet.

Be the first to review “BMRX | Rotary Paddle Level Sensor”

Your email address will not be published. Required fields are marked *

Register Your Interest