The complete solution for monitoring of temperature, humidity, pressure, CO2, voltage, current, pulses, events and other signals. Universal configurable inputs and outputs. For mounting to 19″ rack – one rack unit 1U. Enables to build in the optional MP050 output relays module with 16 relays – see Optional accessories.
Data loggers are designedย for measuring, recording, evaluationย and subsequent processing ofย input electrical signals,ย which are subject toย relativelyย slow changes (> 1s).ย In conjunctionย with the appropriateย sensorsย andย transducers are suitableย forย monitoringย physical quantities.
The deviceย includesย traceable calibration certificateย with declaredย metrological traceability ofย etalons is based onย requirements ofย ENย ISOย /ย IECย 17025.ย The calibrationย sheetย isย alwaysย loadedย asย modules.
If theย defined requiredย configuration of inputs by, calibration certificateย proves calibrationย inputsย according toย theย required configuration –ย more thanย one range forย each of theย 16 inputs.
INCLUDED IN DELIVERY:
MEASURED VALUE
Temperature
Relative humidity
Counted values (dew pointโฆ)
Current
Voltage
Two-state signal
Frequency
Resistance
Event logging
GENERAL TECHNICAL DATA
Operating temperatureย 0 to +50 ยฐC
Channelsย 1 to 16 inputs – software configurable
Memoryย 2MB (up to 480 000 values)
Memory typeย internal SRAM, backed-up by Lithium battery
Recording intervalย adjustable individually for all input channels from 1 second to 24 hours
Recording intervalย noncyclic – data logging stops after filling the memory
cyclic – after filling memory oldest data is overwritten by new
Real time clockย year, leap year, month, day, hour, minute, second, backed-up by Lithium battery
Resolution of the AD converter (analog channels)ย 16 bits, conversion duration approximately 60ms/channel
Communication speedย 9600, 19200, 57600, 115200 Bd, 230400* Bd (* pro USB, Ethernet)
Powerย 24 Vdc
Protection classย IP20
Rozmฤryย 483 x 190 x 44 mm – one rack unit 1U
Weightย approx. 800 g
Warrantyย 3 years
Monitoring system MS may be configured for almost any desired measurement application. Sensors can be wired to datalogger in star-like connection as well as in serial. Combination of both is also possible. The monitoring system MS is characterized by a wide range of communication interfaces such as the RS232, RS485, USB, Ethernet and GSM or GPRS modem. Thanks to Wi-Fi routers several measuring systems MS can be wirelessly connected to a network.
The monitoring systems MS6xx is equipped with 16 freely programmable universal inputs. Each of them can be set to the input signal according to the table below. The monitoring system is thus very flexible and offers ease of use. The RS485 input must be ordered separately if you want to use the Modbus or Advantech communication interface.
Sixteen Channel Data Logger with Alarms
Sixteen Channel Data Logger with Alarms
Sixteen Channel Data Logger with Alarms
8-channel, data acquisition logger with 5โณ touc…
Reviews
There are no reviews yet.