MAXIMA+ | Rotary Level Indicator

NOTE: Power Pack only. Paddles and Accessories (Extensions, Shaft guards, etc.) sold Separately.
Call us on 1300 662 720 to get a quote on complete assembly.

BinMaster’s most advanced rotary level indicator features a complete fail-safe system that alerts to the loss of power, failure of the motor, or failure of the electronics – allowing it to be used for process control. Appropriate for a wide variety of bulk solids including powders, pellets, or granular materials, the MAXIMA+ alerts the user to bin status via an audible horn or light wired to the unit. Notification occurs when the paddle stops rotating and is in a covered condition; it alerts again when the paddle begins to rotate as the bin is emptied and the paddle is uncovered.
The MAXIMA+ can be mounted on either the side of the bin or at the top of a bin using a shaft extension. To prolong motor life and to optimize energy costs, the motor of the MAXIMA+ will “de-energize” once the shaft stops turning when material comes into contact with the paddle. BinMaster offers a variety of stainless steel and polyethylene paddles in single and three-vane designs to accommodate a wide range of industries and applications.

Power Requirements: 24/115/230 VAC, 50/60 Hz; 12/24 VDC, 60/35 mA

Output Relay: DPDT 10 Amp, 250 VAC

Status Indicator Relay: SPDT 10 Amp, 250 VAC (solid state relays optional)

Ambient Operating Temp: -40°F to +185°F (-40°C to +85°C)

Process Temp: Up to +400°F (204°C)

Pressure: 1/2 micron, 30 PSI

Approvals & Certifications: CSA/US Class II, Groups E, F, & G
Ex II 1/2D c Ex tb IIIC T138C Db (Ta = -20C to +85C)

Enclosure Type: NEMA 4X, 5, 9 &12

Enclosure: Die cast aluminum, USDA approved powder coat finish

Mounting: 1-1/4” NPT

Conduit Connection: 3/4” NPT

Shaft and components: Stainless steel

• Reliable point level detection for bulk solids including powders, pellets and granular materials
• Used in bins, silos, chutes and conveyors
• Material density from 2 lb./cu. ft. to over 100 lb./cu. ft.
• Feed, seed, grain, food, sand, gravel, concrete, aggregates, plastics, chemicals, coal and many other materials

• Microprocessor-based fail-safe indicator eliminates spills and process shortages from power failures, motor or gear failures
• Visual LED indicates sensor status:n uncovered, covered and fault conditions
• Supervise normal and fault conditions
• De-energizing motor for extended operational life
• Four-bearing drive shaft assembly reduces wear and increases reliability
• Triple thread screw-off cover
• Internal, bi-directional clutch
• Multiple voltages
• Interchangeable with other rotaries
• Powder-coated finish
• Adjustable sensitivity