Customer Support

1300 662 720

MW102 PRO | pH Tester

$ 319.50 Ex. GST

7 in stock (can be backordered)

Warranty Options:
Order total:

$319.50 Ex. GST

Standard portable meters with no frills! Milwaukeeโ€™s low cost durable meters for quick and reliable measurements.

Milwaukeeโ€™s Standard meters are manufactured to be easy to use, practical and accurate. Ideal for the classroom, laboratory or for general field use.

MW102 pH tester is a microprocessor based pH/Temperature meter with extended range (-2.00 to 16.00 pH), Automatic Temperature Compensation, automatic calibration in 2 points and ยฑ0.02 pH accuracy. The meter is supplied with pH electrode and calibration solutions.

 
CARE AND USE

All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Starter Solution Kit for pH Meters at checkout time! This will be needed to help clean and condition the pH electrode before use!

Here are our top four tips:
1. Always store with the cap full of buffer or Storage Solution not water.
2. Clean your Tester regularly by soaking in Cleaning Solution.
3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH sensor.
4. Gently stir the Tester in the sample for a faster result.


 
ORDERING INFORMATION
MW102 is supplied complete with a SE220 pH electrode, MA830R stainless steel temperature probe, pH 4.01 and pH 7.01 20 mL sachet of calibration solution, 9V battery and instructions.
  • pH Range: -2.00 to 16.00 pH
  • Temp Range: -5 to 70ยฐC
  • pH Accuracy ยฑ0.02 pH
  • pH Resolution: 0.01 pH
  • pH Typical EMC Deviation: ยฑ0.2 pH
  • Temp Resolution 0.1ยฐC
  • Temp Accuracy (@25ยฐC): ยฑ0.5ยฐC
  • Temperature Compensation: Automatic, 0 to 70ยฐC
  • Temp Typical EMC Deviation: ยฑ0.5ยฐC
  • Calibration: Automatic, 1 or 2 points
  • pH Electrode: SE220 (included)
  • Temperature: Probe MA831R (included)
  • Environment: 0 to 50ยฐC / 32 to 122ยฐF; max RH 95%
  • Battery Type: 1 x 9V (included)
  • Battery Life: Approx. 300 hours of continuous use
  • Auto-off: After 8 minutes of non-use
  • Approximate dimensions: 5.7 x 3.1 x 1.6 inches
  • Weight: 1.1 lbs with battery
  • Standard 12 Month Warranty for the meter and 6 months warranty for the probe

Reviews

There are no reviews yet.

Be the first to review “MW102 PRO | pH Tester”

Your email address will not be published. Required fields are marked *

Register Your Interest