Intuitive, traceable and high-performance: E10 enables the complete and connected management of sterilization data with the best digital and paper-based traceability systems. Its intuitive interface, with a 7″ colour display, simplifies and speeds up daily operations.
E10 offers the option of selecting 5 different B cycles and, after entering a password, 1 S and N cycle. In addition to cycles, tests can also be programmed to optimise the use of time.
Thanks to the USB Ethernet connection (both standard), all cycle data can be transferred and conveniently managed on a PC via the free E-Data software, while the WiFi (standard) enables full digital traceability. It is also possible to install 3 different types of optional printers, at any time, for printing receipts or thermal labels containing data or barcodes.
The control systems and advanced functionalities common to all Euronda Pro System autoclaves guarantee safe processes and results over time: the Inspection System allows easy and frequent cleaning; the Dirt Control System separates clean and dirty water flows, draining the dirt from the hydraulic circuit; the conductivity meter constantly monitors water quality; while the air-water separator optimizes the pump operation.
Sterilization cycles and test programs
E10 offers the possibility of performing B, N and S cycles in addition to test programs (Vacuum, Helix, Bowie and Dick). From the menu it is possible to select 3 type B cycles (121°, 134°, 134° Prion) and 2 fast cycles (134° fast, 134° Prion fast), in full compliance with EN 13060. Fast cycles allow sterilization of a small load (1 tray and a 0.6 Kg solid load) 30% faster than standard cycles.
It is also possible to perform N (N134) and S (S134) type cycles, which can be activated by a password.
Load capacity
For E10, the maximum load of bagged solids is 4.5 kg for the 18-litre version and 6 kg for the 24-litre version.
E10 offers up to 4 solutions to optimise the load to be sterilized according to different requirements: the standard tray holder with 5 trays, 2 optional tray holders for the 18-litre version and 3 optional tray holders for the 24-litre version.
| E10 – 18 L | E10 – 24 L | |
| Dimensions | 460 x 455 x 610 mm (WxHxD) | |
| Weight (machine empty with basket) | 47.5 Kg | 50.5 Kg |
| Power supply | 230 V 50/60 Hz | |
| Absorbed current | 2300 W 10 A | |
| Operating temperature | +5 – +40°C | |
| Operating altitude | ≤ 2000 m a.m.s.l * | |
| Minimum depth of the support surface | 500 mm | |
| Minimum width of the support surface | 460 mm | |
| Minimum space above the tank | 0 mm leaving the loading cap free | |
| Noise level | 50 dB | |
| Weight per support area (tank full and chamber with max. load) |
47,5 + 8,5 + 4,5 = 60,5 Kg Load on each foot: 15,125 Kg |
50,5 + 8,5 + 6 Kg = 65 Kg Load on each foot : 16,25 Kg |
| Operating range | Indoor use – Relative humidity 85% Maximum line-voltage deviation ±10% Installation category II – Pollution level 2 |
|
| Average water consumption per cycle | 300 ml | |
| Tank capacity (clean water / used water) | 5 / 3.5 litres | |
* For altitudes higher than 2000m, please contact Euronda SPA
Self adhesive sterilization pouches made of heavy…
High quality sterilization paper rolls available …
Built-in adhesive labels printer for Euronda Auto…
Device that allows Euronda autoclaves to be conne…
Reviews
There are no reviews yet.