MS55D | Monitoring System

The complete solution for monitoring of temperature, humidity, pressure, CO2, voltage, current, pulses, events and other signals. Configurable inputs and outputs.

Data loggers are designed for measuring, recording, evaluation and subsequent processing of input electrical signals, which are subject to relatively slow changes (> 1s). In conjunction with the appropriate sensors and transducers are suitable for monitoring physical quantities.

The device includes traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO / IEC 17025. The calibration sheet is always loaded as modules.
If the defined required configuration of inputs by, calibration certificate proves calibration inputs according to the required configuration – more than one range for each of the 16 inputs.

Warranty: 3 years

INCLUDED IN DELIVERY:

EXTERNAL PROBES ARE NOT INCLUDED IN DELIVERY

MEASURED VALUE

Temperature

Relative humidity

Counted values (dew point…)

Current

Voltage

Two-state signal

Pulses

Frequency

Resistance

Event logging

GENERAL TECHNICAL DATA

Operating temperature 0 to +50 °C

Channels 1 to 16 hardware modules

Memory 2MB (up to 480 000 values)

Memory type internal SRAM, backed-up by Lithium battery

Recording interval adjustable individually for all input channels from 1 second to 24 hours

Recording interval noncyclic – data logging stops after filling the memory
cyclic – after filling memory oldest data is overwritten by new

Real time clock year, leap year, month, day, hour, minute, second, backed-up by Lithium battery

Resolution of the AD converter (analog channels) 16 bits, conversion duration approximately 60ms/channel

Communication speed 9600, 19200, 57600, 115200 Bd, 230400* Bd (* pro USB, Ethernet)

Power 9 to 30Vdc, 24Vdc recommended

Protection class IP20

Dimensions (including connectors) 215 x 225 x 60 mm

Weight approx. 800 g

Warranty 3 years

Device enables:

to measure and process 1 to 16 input signals
to acquire autonomous time record of measured values
create alarm states
to perform other actions based on created alarms (audible, visual indication, controlling of relay outputs, sending SMS message, controlling of telephone dialer, sending of messages via several protocols of the Ethernet interface etc.)
to monitor on-line measured values and states
independent hysteresis setting, delay (for each channel separately)
setting up to four alarm conditions (for each channel separately)

Common connectivity options

Monitoring system MS may be configured for almost any desired measurement application. Sensors can be wired to datalogger in star-like connection as well as in serial. Combination of both is also possible.

The monitoring system MS is characterized by a wide range of communication interfaces such as the RS232, RS485, USB, Ethernet and GSM or GPRS modem. Thanks to Wi-Fi routers several measuring systems MS can be wirelessly connected to a network.

modular inputs for temperature sensors Pt and Ni, thermocouples and thermistors, voltage and current, two-state events, frequency and pulses, resistance, sensors with RS485 output
memory for 500 000 records with automatic downloading to PC
alarm indication via integrated siren, e-mail, SMS and two-state output to control other devices
software for data analysis on PC
communication interface USB, RS232, relays, RS485 (Modbus RTU), ETHERNET (Modbus TCP, SOAP, etc.)

Instruction Manual – Basic

Instruction Manual – Appendix

Declaration of Comformity

MIB

Configurable inputs for M55D

Monitoring system setup wizard step by step – PowerPoint

CATALOG – Monitoring Systems