COMET relative humidity sensors and transmitters for HVAC, food & pharma, cleanroom and compressed-air monitoring — capacitive RH sensing with a choice of RS232, RS485, Ethernet, PoE, WiFi, 4-20mA or 0-10V output.
Need a bare replacement probe instead of a complete unit? See our Temperature & Humidity Probes.
Need dew point or CO2 measured alongside humidity? See our Dew Point Sensors and CO2 Sensors.
Need a portable logging instrument instead of a fixed installation? See our Temperature & Humidity Data Loggers.
COMET relative humidity sensors and transmitters for HVAC, food & pharma, cleanroom and...
COMET relative humidity sensors and transmitters for HVAC, food & pharma, cleanroom and compressed-air monitoring — capacitive RH sensing with a choice of RS232, RS485, Ethernet, PoE, WiFi, 4-20mA or 0-10V output.
Need a bare replacement probe instead of a complete unit? See our Temperature & Humidity Probes.
Need dew point or CO2 measured alongside humidity? See our Dew Point Sensors and CO2 Sensors.
Need a portable logging instrument instead of a fixed installation? See our Temperature & Humidity Data Loggers.
Temperature and humidity regulator with 230Vac/8A…
Temperature and humidity regulator with 230Vac/8A…
Thermometer hygrometer with Ethernet interface an…
Thermometer Hygrometer with Ethernet interface an…
Compressed-air thermometer hygrometer with Ethern…
Rack mount thermometer hygrometer with Ethernet i…
Temperature, humidity, CO2 transmitter…
Temperature and humidity regulator with RS232 out…
Thermometer hygrometer barometer with Ethernet in…
Temperature, humidity, CO2 transmitter…
Web Sensor with PoE, two channels with flood dete…
Wi-Fi temperature and relative humidity sensor fo…
Compressed air temperature and humidity regulator…
Compressed air temperature and humidity regulator…
Humidity, temperature transmitter. Outdoor, indoo…
Ambient temperature, relative humidity transmitte…
Temperature and Humidity 4-20mA output
Web Sensor with PoE – Remote thermometer hy…
Web Sensor with PoE – remote thermometer hygrom…
COMET humidity sensors use a capacitive sensing element — a thin polymer film whose electrical capacitance changes as it absorbs or releases moisture from the surrounding air. This gives stable, drift-resistant readings across the 0–100% RH range, paired in every product on this page with a temperature sensor for combined T+RH output.
This range covers every signal type PST supplies: 4-20mA and 0-10V for direct PLC/BMS analogue inputs, RS232 and RS485 for serial/Modbus networks, and Ethernet, PoE or WiFi for networked installations. See our dedicated RS232, RS485, Ethernet, PoE, WiFi and 4-20mA/0-10V transmitter ranges if you’re starting from the output type rather than the parameter.
For direct control rather than monitoring alone, the COMET H3060, H3061, H3331 and H6020 combine humidity sensing with built-in relay outputs — switching fans, dehumidifiers or HVAC equipment directly from a humidity setpoint without a separate controller.
Duct-mount (T3113D, T3413D, T6445, T0213D), wall-mount (T6440), remote-probe and compressed-air (T3511P, H3531P, T0211P, T3419P) variants are available across most output types — check the individual product page for the mounting style that matches your installation. Intrinsically safe ATEX models (T3110Ex, T3111Ex, T3113Ex) are available for hazardous-area monitoring.
For a bare replacement probe rather than a complete transmitter, see our Temperature & Humidity Probes. For a portable logging instrument, see our Temperature & Humidity Data Loggers. For a handheld meter, see our COMET and CENTER humidity meters listed in this range.