Literature

Instruction Manual

Ecowitt WN36 | Pool Thermometer

Monitor pool, pond, spa, or aquarium water temperature in real time with the Ecowitt WN36 wireless pool thermometer. Its fully sealed, ultrasonic-welded IP68 housing has no removable battery cover, eliminating the leak points common to standard sensors, while the included weighted anchor keeps the probe submerged exactly where you need it. Run up to 8 WN36 sensors on individual channels and pair with any compatible Ecowitt gateway or console — including the GW1200, GW3000, and the WS/HP/WN series — for instant remote temperature monitoring via the Ecowitt app from anywhere.

$ 75.00 Ex. GST

1 READY TO SHIP

Availability Info ?

Literature

Instruction Manual

Description

Poolthermometer with an anchor.
None opening design with ultrasonic body welding: IP68 waterproof.
Idle mode for further powerreduction (keep pressing the button for 8 seconds).
Minimum operating lifetime: 3 years.
User-selectable channel number up to 8 channels.

Compatible gateways / consoles (Wi-Fi and/or Cellular):
GW1100/GW1200/GW2000/GW3000/WS6006/WS6210/HP2550/HP2560/HP3500/WS3800/WS3820/WS3900/WS3910/WN1920/WN1980/WN1820/WN1821/WN1900/WN1910/WS2910/WN1700

NOTE

The sensor may share the same channels with other sensors of the same type.
Some data is cloud-only and not available on compatible consoles.
Compatibility may change with product updates. Please refer to the latest compatibility table(at the bottom of the product page) or contact us for confirmation.

Please refer to the table to choose correct additional sensors and consoles before checkout.

Specifications

Temperature Range: 0°C to 60°C
Accuracy: ±1°
Resolution: 0.1°

Power Consumption
Non-replaceable battery life: Minimum 3 years (5 years by stationary state)

Transmission between Gateway and Sensor

Transmission distance in the open field: 100 m (330 ft.) depends on the environment
RF frequency: Oceania MHz 433
Updates on the gateway: About 60 seconds

Two Working Mode

Idle mode
press button 3s to wake up the device. Once power up, it will display the “36” model number and RF frequency, like 915, for 2s, and resume normal mode operation.
Normal mode
- quick press once to toggle Celsius or Fahrenheit temperature unit.
- Press and hold for 3s, the channel number will start to flash. Release and press once in a cycle between channels 1 and 8. Leaving key untouched for 10s will terminate the channel setting.
- Press and hold for 8s will force the device to enter idle mode: LCD will be off and enter a minimum power consumption state. If you keep the WN36 in idle mode for 6 months per year, you can extend the battery life to a minimum of 5 years.

Package Content

1 x Pool thermometer EN36
1 x User Manual

Accessories